TM 5-5420-228-24
HEU AND EARLY MODEL HOLD-DOWN CYLINDER REPAIR (Sheet 4 of 4)
8.
Install bushing (K) on piston rod (B).
9.
Using spanner wrench in unthreaded holes (L), tighten bushing (K).
10. Install new wiper ring (M) on piston rod (B).
11. Install retainer plate (N) on piston rod (B) and aline holes with threaded holes in bushing (K).
12. Using cross-tip screwdriver, install four screws (P).
13. Remove tape from threads of piston rod (B).
14. Install hold-down cylinder (page 3-255).
End of Task
