DRIVER'S HATCH NIGHT VIEWER LATCH REPAIR (Sheet 10 of 10)
29. Position assembled parts as shown with rod (T)
over threaded portion of shaft (F).
30. Place flat washer (Z), lockwasher (AA), and
nut (AB) on shaft (F).
31. Using 7/16 inch wrench, tighten nut (AB).
32. Hold night viewer latch firmly on a flat surface.
Release lever (K) and turn handle (M) forward
1/2 turn to locked position. Release and return
to position shown.
H a n d l e should lock in both
forward and rear positions and
plunger (W) should not bind during
End of Task