TM 5-5420-228-24
HEU HYDRAULIC PUMP REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
NOTE
Remove caps as necessary during installation.
1.
Place hydraulic pump (D) on level surface, using 1 1/8 inch socket, install two screws (F), and two new
lockwashers (G) into hydraulic pump (D) and adapter plate (C).
2.
Install hydraulic pump (D) into pump support (E).
3.
Using a 1-1/8 inch socket, install two screws (A) and two new lockwashers (B) into hydraulic pump adapter
plate (C).
4.
Install hose assembly "BY" (page 3-204.56).
5.
Install hose assembly "BS" (page 3-204.50).
6.
Install hose assembly "BW" (page 3-204.55).
7.
Install drive shaft assembly (page 4-52.4)
8.
Install control panel (TM 20-2).
9.
Bleed hydraulic system (page 3-72).
10. Check for leaks repair as required.
11. Install pump cover (page 3-65).
12. Service hydraulic reservoir (LO-12).
End of Task
