LOADING BAP FROM GROUND (Contd)
If BAP is loaded, ensure front pin lock assemblies are
up and their jaws closed, and rear guides are locked in
the MID position at both sides of BAP. Failure to
comply may result in possible loss of bay or rollover of
transporter, causing damage to equipment, and possible
injury or death to personnel.
Perform steps h and i if bay is loaded on BAP.
h. Rotate handle (2) until rear guide (1) is disengaged and move rear guide (1)
inboard or outboard until locked in MID position at both sides of BAP.
i. Position both front pin lock assemblies (4) in the UP position, and ensure
jaws (3) are locked.