UNLOADING BAP TO GROUND (Contd)
High idle switch must be in the OFF position prior to
engaging PTO. Failure to comply may result in damage to
the vehicle transmission or the LHS.
m. With HIGH IDLE switch (3) in OFF position, turn PTO ENGAGE switch (1) to
ON position. PTO ENGAGE indicator (2) will light.
n. Turn HIGH IDLE switch (3) to ON position.
When the NO TRANSIT WHEN LIT indicator is
illuminated, the CBT may be maneuvered in the
immediate vicinity of the loading/unloading site, but
should not be driven on the open road. Failure to comply
may result in damage to equipment and possible injury or
death to personnel.
The LHS ENGAGED indicator will light up whenever the
joystick is held in the LOAD or UNLOAD position.
o. Hold joystick (5) in UNLOAD position until LHS hook arm (7) moves BAP (8)
rearward, and rear end of BAP (8) contacts ground. NO TRANSIT WHEN LIT
indicator (4) will light.