LOADING BAY FROM GROUND
Assistant will act as a ground guide when maneuvering
CPT and during operation of the LHS. Failure to
comply may result in damage to equipment.
During all transporter operations, the CBT operator
will drive and be responsible for the operation of the
LHS via the cab and remote control boxes. The
assistant will act as a ground guide, be responsible for
directing the operator using hand signals, and assist
the operator as needed.
The BAP must be loaded on the CBT prior to loading
bay. Perform step a if BAP is not loaded on CPT.
a. Load BAP on CBT. (Refer to WP 0020 00, Loading BAP from Ground.)
Perform step b if loading ramp bay or step c if loading
b. Check to ensure both foldlocks (1) and travel latch (2) are in their closed
positions at the connecting end of ramp bay.
c. Check to ensure both foldlocks (3) and travel latch (4) at both ends of interior
bay are in their closed positions.