LOADING BAY FROM GROUND (Contd)
h. Check hold-down lock (14) at both sides of BAP to ensure they are in AUTO
ENGAGED position; handles (15) should be in.
Keep hands and fingers clear of front pin lock
assemblies once set in the DOWN position. Failure to
comply may result in injury to personnel.
i. Set both front pin lock assemblies (16) in DOWN position by pulling back front
pin lock assembly (16) until latch pin (18) engages latch (17) in UP position.
j. Set both rear guides (19) in MID position by rotating handle (21) until rear
guide (19) is disengaged, then move rear guide (19) inboard or outboard until
latch pin (20) engages rear guide (19).