LOADING BAY FROM GROUND (Contd)
k. Position CBT so that rear of vehicle is approximately 5 ft (1.5 m) in front of
bay, apply service brake (3), move transmission selector lever (2) to N
(neutral), and pull PARKING BRAKE control (1) out.
Operator will perform steps l and m from cab using the
LHS control box.
l. Turn LHS MODE SELECT switch (4) to 0 (OFF/TRANSPORT) position.
High idle switch must be in the OFF position prior to
engaging PTO. Failure to comply may result in damage
to vehicle transmission or the LHS.
m. With HIGH IDLE switch (5) in OFF position, turn PTO ENGAGE switch (7) to
ON position. PTO ENGAGE indicator (6) will light.