LOADING BAY FROM GROUND (Contd)
Ensure WINCH switch is released once hook holder is
seated in winch saddle or damage to equipment may result.
v. Hold WINCH switch (3) in IN position until hook holder (10) is in
saddle (9), then release switch (3).
While loading bay, it may be necessary to steer
transporter to guide bay onto BAP rear rollers.
w. Hold MAIN FRAME switch (1) in LOAD position until bay (11) contacts BAP
rear rollers (14) and clears ground, release switch (1), and pull PARKING
BRAKE control (8) out.
x. Hold MAIN FRAME switch (1) in LOAD position until LHS main frame (13) is
fully stowed, release switch (1), and turn HIGH IDLE switch (15) to OFF.
When the NO TRANSIT WHEN LIT indicator is
illuminated, the CBT may be maneuvered in the
immediate vicinity of the loading/unloading site, but
should not be driven on the open road. Failure to
comply may result in damage to equipment and
possible injury or death to personnel.
y. Hold HOOK ARM switch (2) in LOAD position until LHS hook arm (12) is
fully stowed and NO TRANSIT WHEN LIT indicator (16) is off.