UNLOADING BAY TO GROUND (Contd)
g. Remove remote control unit (16) and RCU cable (12) from stowage box (15),
and connect RCU cable (12) to receptacle (14), located at main manifold
support frame (13).
Operator will perform steps h and i from cab using the
LHS control box.
h. Turn LHS MODE SELECT switch (17) to 0 (OFF/TRANSPORT) position.
HIGH IDLE switch must be in the OFF position prior to
engaging PTO. Failure to comply may result in damage
to the vehicle transmission or the LHS.
i. With HIGH IDLE switch (18) in OFF position, turn PTO ENGAGE switch (19)
to ON position. PTO ENGAGE indicator (20) will light.