UNLOADING BAY TO GROUND (Contd)
Keep hands and fingers clear of front pin lock
assemblies once set in the DOWN position. Failure to
comply may result in injury to personnel.
Movement of the LHS hook arm may be necessary to
release the front pin lock assemblies.
n. Set both front pin lock assemblies (10) in DOWN position by pulling back front
pin lock assembly (10) and depressing hatch (11) to DOWN position until
engaged with latch pin (12).
o. Set both rear guides (13) in full OUT position by rotating handle (15) until
rear guide (13) is disengaged, then move rear guide (13) outboard until latch
pin (14) engages rear guide (13).