UNLOADING BAY TO GROUND (Contd)
p. Turn HIGH IDLE switch (1) to ON position.
q. Hold HOOK ARM switch (3) in UNLOAD position until hook arm cylinders (5)
are extended approximately 6 in. (15 cm), then release switch (3).
If unloading ramp bay on concrete or asphalt surface,
place a wood block under the tip of the inner ponton
ramp ends to prevent damage should ramp bay slide
forward while unloading.
r. Hold MAIN FRAME switch (4) in UNLOAD position until rear of bay (7)
touches ground, then release switch (4) and immediately release parking brake
by pushing PARKING BRAKE control (6) in.
s. Hold MAIN FRAME switch (4) in UNLOAD position and steer transporter as
it rolls forward. Release switch (4) when front end of bay (7) is approximately
2 ft (0.6 m) above ground.
t. Turn HIGH IDLE switch (1) to OFF.