TM 5-5420-278-10
0023 00
0023 00-7
UNLOADING BAY TO GROUND (Contd)
u. Hold WINCH switch (2) in OUT position until bay (7) rests completely on
ground, then pull PARKING BRAKE control (6) out.
WARNING
Always wear leather gloves when handling winch cable.
Failure to comply may result in injury to personnel.
v. Hold MAIN FRAME switch (4) to UNLOAD position until winch cable (9) is
slackened. Release switch (2) and disconnect winch cable hook (8) from lifting
lug (10).
CAUTION
Ensure WINCH switch is released once hook holder is
seated in winch saddle or damage to equipment may
result.
w. While assistant maintains tension on winch cable (9), hold WINCH switch (2)
in IN position until hook holder (14) is in saddle (13), then release switch (2).
x. Turn HIGH IDLE switch (1) to ON.
y. Hold MAIN FRAME switch (4) in LOAD position until LHS main frame (12) is
fully stowed. Release switch (4) and turn HIGH IDLE switch (1) to OFF.
WARNING
When the NO TRANSIT WHEN LIT indicator is
illuminated, the CBT may be maneuvered in the
immediate vicinity of the loading/unloading site, but
should not be driven on the open road. Failure to
comply may result in damage to equipment and
possible injury or death to personnel.
z. Hold HOOK ARM switch (3) in LOAD position until LHS hook arm (11) is
fully stowed and NO TRANSIT WHEN LIT indicator (15) is off.
13
14
15