HIGH-BANK LAUNCH OF BAY (Contd)
l. Turn LHS MODE SELECT switch (11) to 0 (OFF/TRANSPORT) position.
High idle switch must be in the OFF position prior to
engaging PTO. Failure to comply may result in damage
to the vehicle transmission or the LHS.
m. With HIGH IDLE switch (12) in OFF position, move PTO ENGAGE
switch (9) to ON position. The PTO ENGAGE indicator (10) will light.
n. Remove remote control unit (13) from stowage box (17), and connect RCU
cable (14) to receptacle (16), located at main manifold support frame (15).