BAY RETRIEVAL (Contd)
f. Check hold-down lock (10) at both sides of BAP to ensure they are in AUTO
been pushed in.
The BAP winch frame must be locked to the LHS hook
arm for bay retrieval. Failure to comply may result in
damage to equipment or injury to personnel.
When both winch frame lock levers are in the DOWN
position, the winch frame is locked to the LHS hook
arm. Perform steps g and h if levers are in the UP
g. Remove quick-release pins (13) from stud (11) at both sides of winch
h. Swing lever (15) down so that end of stud (14) is through hole in lever (15),
and install quick-release pin (13) on stud (14) at both sides of winch