TM 5-5420-278-10
0047 00
0047 00-3
MANUALLY LOADING BAP FROM GROUND (Contd)
CAUTION
High idle switch must be in OFF position prior to
engaging PTO. Failure to comply may result in damage
to vehicle transmission or LHS.
NOTE
Operator will perform steps f through aa using LHS cab
control box.
f. With HIGH IDLE switch (8) in OFF position, move PTO ENGAGE switch (9)
to ON position. PTO ENGAGE indicator (10) will light.
g. Turn LHS MODE SELECT switch (6) to HOOK ARM ONLY (position 2).
h. Move HIGH IDLE switch (8) to ON position.
NOTE
LHS ENGAGED indicator will light up whenever
joystick is held in LOAD or UNLOAD position.
i. Hold joystick (7) in UNLOAD position until LHS hook arm is fully extended
rearward, then release joystick (7).
j. Move HIGH IDLE switch (8) to OFF position.
6
7
8
10
9