TM 5-5420-278-10
0048 00
0048 00-1
MANUALLY UNLOADING BAP TO GROUND
NOTE
The following manual mode operations using the cab
control box are to be performed only when the normal
AUTO SEQUENCE mode electric circuit is
malfunctioning.
During all transporter operations, the CBT operator
will drive and be responsible for the operation of the
LHS via the cab control box or remote control unit. The
assistant will act as a ground guide, be responsible for
directing the operator using hand signals, and assist
the operator as needed.
a. Position CBT so that rear of vehicle is approximately 16 ft (4.9 m) in front of
where BAP is to set on ground, then apply service brake (3), move
transmission selector lever (2) to N (neutral), and pull PARKING BRAKE
control (1) out.
3
2
1