MANUALLY UNLOADING BAP TO GROUND (Contd)
t. Push PARKING BRAKE control (5) in and drive CBT forward approximately
5 ft (1.5 m), then apply service brake (7), move transmission selector
lever (6) to N (neutral), and set parking brake by pulling PARKING BRAKE
control (5) out.
u. Move HIGH IDLE switch (4) to ON position.
v. Hold joystick (3) in LOAD position until main frame (12) is fully stowed, then
release joystick (3).
w. Move HIGH IDLE switch (4) to OFF position.
x. Turn LHS MODE SELECT switch (1) to HOOK ARM ONLY (position 2).
y. Move HIGH IDLE switch (4) to ON position.
z. Hold joystick in LOAD position until hook arm (11) is fully stowed and NO
TRANSIT WHEN LIT indicator (2) is off.