PREPARATION FOR EMERGENCY MANUAL REMOVAL OF BAP (Contd)
Perform steps g and h if BAP air supply hose is
connected to transporter or disconnected from stowage
g. Disconnect air supply hose (15) from tire inflation air coupling (13),
located on vehicle frame (14) near fuel tank at drivers side.
h. Connect air supply hose (15) to stowage coupling (17) at side of BAP
BAP hold-down locks must be unlocked prior to
unloading BAP to ground. Failure to comply will result
in damage to equipment.
i. Set both BAP hold-down locks (18) in DISENGAGED position by pulling out
The BAP is front-heavy. Ensure BAP hangs level when
lifted or damage to equipment may result.
j. Connect lifting sling to four BAP lifting eyes (20) and connect large ring at
opposite end of lifting sling to lifting hook of crane or other material handling