PREPARATION FOR EMERGENCY MANUAL REMOVAL OF BAP (Contd)
k. Remove locking pin (2) from hook arm (1).
Do not lift a load greater than the rated load capacity of
the crane or materiel handling equipment. Failure to
comply may result in damage to equipment or possible
injury or death to personnel.
All personnel must stand clear of equipment prior to
lifting operations or serious injury or death may result.
The BAP weighs 5,810 lb. (2,637 kg). The BAP with bay
weighs a minimum of 19,810 lb. (8,986 kg).
l. Signal crane operator to slowly lift BAP until weight of BAP is off
LHS hook arm is heavy and will fall free when the BAP
is moved rearward. Under no circumstances should
LHS hook arm be pried free from BAP hook bar by
personnel. Failure to comply may result in injury or
death to personnel.
m. Move the BAP rearward until LHS hook (4) drops free of BAP hook bar (3).
n. Raise BAP until clear of transporter, then set BAP on ground and slacken
o. Disconnect large ring of lifting sling from crane lifting hook, and remove
lifting sling from four BAP lifting eyes.
END OF WORK PACKAGE