END OF WORK PACKAGE
MANUALLY REMOVING LOAD DURING LHS POWER LOSS (Contd)
c. Disconnect LHS hoses (2) and (3) from quick-disconnects (1) and (4) on both
f. Start engines of both transporters and perform load/unload operations using
operable transporter controls (refer to WP 0020 00 and WP 0021 00 for
g. After completion of loading/unloading procedures, disconnect and connect
hoses in reverse order.
Make sure slave hoses are not stretched or run over
during operation or damage to equipment may result.
d. Connect two slave hose assemblies (5) to LHS hoses (2) and (3) on disabled
e. Connect opposite ends of two slave hose assemblies (5) to quick-disconnects
(1) and (4) on operable transporter.