Skysol-100 cleaning solvent is combustible. Use
mechanical ventilation whenever product is used in a
confined space, is heated above ambient temperatures,
or is agitated. DO NOT use or store near heat, sparks,
flame, or other ignition sources. Keep container sealed
when not in use.
Contact with Skysol-100 cleaning solvent may cause
skin irritation. Use chemical resistant gloves. In case
of skin contact, remove any contaminated clothing and
wash skin thoroughly with soap and water. Wash
contaminated clothing before reuse. Eye contact may
cause irritation, tearing or blurring of vision, Use face
shield or goggles when eye contact may occur. In case
of eye contact, flush eyes with large amounts of water
for at least fifteen (15) minutes or until irritation
subsides. Inhalation may cause irritation to upper
respiratory passages. DO NOT have food or drink in
Before opening reservoir, ensure area around reservoir
filler cap is clean. Do not allow dirt, dust, or water to
enter reservoir. Failure to do this may cause damage
to internal components.
c. Oil and Grease Covered Surfaces. Using Skysol-100, clean oil and grease
from exterior surfaces of bay prior to cleaning dirt, mud, and debris with soap and
d. Oil Seals and Flexible Hoses.
Do not allow Skysol-100 to come in contact with seals
or flexible hoses. Failure to comply will result in
damage to parts.
e. External Surfaces. Clean all external surfaces of bay with soap and water
and rinse thoroughly. Use power wash pump when cleaning to save time and effort.
(Refer to WP 0053 00.)