TM 5-5420-278-10
0068 00
0068 00-4
EYEBOLT ASSEMBLY SERVICE
NOTE
Cleaning and lubrication of eyebolt assembly is the
same for IRB-R and IRB-I. Interior bay is shown.
Ramp bay rear eyebolt is shown.
1.
Clean area around eyebolt (3), two connecting links (2), and cover (1) prior
to lubricating. Refer to WP 0066 00 for general cleaning instructions.
2.
Lubricate two connecting links (2) and cover (1) at their pivot points using
lubricating oil (Item 5, WP 0072 00). Remove excess oil with clean rags.
3.
Lubricate eyebolt (3) (Item 5, WP 0072 00).
4.
Repeat steps 1 through 3 at opposite end of bay.
EYEBOLT ASSEMBLY
REAR EYEBOLT ASSEMBLY, RAMP BAY ONLY
3
3
1
2
2
COTTER PINS