Skysol-100 cleaning solvent is combustible. Use mechanical ventilation
whenever product is used in a confined space, is heated above ambient
temperatures, or is agitated. DO NOT use or store near heat, sparks, flame,
or other ignition sources. Keep container sealed when not in use.
Contact with Skysol-100 cleaning solvent may cause skin irritation. Use
chemical- resistant gloves. In case of skin contact, remove any
contaminated clothing and wash skin thoroughly with soap and water.
Wash contaminated clothing before reuse. Eye contact may cause irritation,
tearing, or blurring of vision. Use face shield or goggles when eye contact
may occur. In case of eye contact, flush eyes with large amounts of water
for at least fifteen (15) minutes or until irritation subsides. Inhalation may
cause irritation to upper respiratory passages. DO NOT have food or drink
in the vicinity.
Keep container covers clean and allow no dust, dirt, or other foreign
material to mix with lubricants. Keep all lubrication equipment clean and
ready to use.
1. Keep all external parts of equipment not requiring lubrication free of lubricants.
2. Before lubricating equipment, clean fittings. Use Skysol-100 to wipe all lubrication points free of dirt
and grease and dry before lubricating. After servicing lubrication points, wipe off excess lubricants to
prevent accumulation of foreign matter.
1. Pump system: Drain and refill system (WP 0032 00) every 24 months.
2. Pump filter element: Change filter element (WP 0034 00) every 24 months.
3. Bleed pump system (WP 0038 00).
Table 1. Ramp Bay Intervals.
Pump reservoirs (2)
Pump fluid HFCn/MIL H22072A
Drain and fill
NATO CODE H579 (100% propyl
Torsion bars (2)
Lube fittings (2)
Hinge point (1)
AeroShell grease 17
Cable connections (2)
SRB type MIL-G-10924
Lower lock connecting
pin lever (1)
After operation or
Apply to threads
LUBRICATION INSTRUCTIONS (Contd)