3.14.3 Crane Stabilizer Leg Extension
On extremes of cross slope, it may be necessary to use the crane stabilizer leg extension
(3) to increase the length of the stabilizer leg. With the stabilizer foot just above the
ground support the weight of item (9) with the handle and remove pin (4) and clip (5).
Manually lower the crane spreader plate and leg extension (9) to the ground, using the
crane stabilizer controls retract the stabilizer cylinder to a suitable height.
Reinsert pin (4) and clip (5) to secure stabilizer extension.
Extend stabilizer leg as normal to complete setup of crane carry out Paras 22.214.171.124 to
Figure 3. 76 Crane Stabilizer Leg Extension