TM-5-5420-279-10
3.14.4 Bringing the Crane into the Working Position
WARNING
CRUSH HAZARD. DO NOT REMAIN IN DANGER AREA WHILE THE CRANE IS UNFOLDING.
FAILURE TO HEED THIS INSTRUCTION CAN LEAD TO DEATH OR SEVERE INJURY.
CRANE OPERATION. WHEN OPERATING THE CRANE HEED THE SYMBOLS ON THE
CONTROL LEVERS. FAILURE TO HEED THIS INSTRUCTION CAN LEAD TO DEATH OR
SEVERE INJURY TO SURROUNDING PERSONNEL.
CAUTION
Operate the control levers in a smooth and considered manner. The speed of the working
movements is determined by the degree to which the control lever is moved.
Beware of obstacles in the danger area. Failure to heed this instruction can lead to equipment
damage.
Do not rotate the crane or extend the extension piece of the jib, until the boom and the jib are
in working position. Failure to heed this instruction can lead to equipment damage.
3.14.4.1
Ensure that procedures in 3.14.1 and 3.14.2 have been carried out.
3.14.4.2
Remove the locking pin (1).
Crane Boom Transport Pin
3.14.4.3
Move the crane to stabilizer control lever (1) from stabilizer (A) to crane (B).