TM-5-5420-279-10
Position of Flatracks
4.9.2.7
Load flatrack V2 onto vehicle V1 at staging area.
4.9.2.8
Drive vehicle V1 and flatrack V2 to bridge site.
4.9.2.9
Reverse vehicle V1 with its left hand wheels on the left hand tire alignment line and
ground load flatrack V2 into position in front of flatrack T2.
Position of Flatracks
NOTE
Flatrack loads V2 and T2 are identical with both flatracks carrying parallel modules only.
All parallel modules are identical and may be positioned in the bridge in any order. To
stop parallel modules being craned high and over other flatrack loads the parallel modules
from the flatrack nearest the gap (T2) should be used first. Once empty the parallel
modules from the flatrack furthest from the gap (V2) can be craned into position over the
now empty flatrack.
4-53