10 Remove the stabilizer feet, by removing the nyloc nuts and the securing U-bolts.
11 Raise the stabilizer legs using the controls at center of the A-frame lower cross-
member. Re-insert the U-bolt and nyloc nuts in the feet for safekeeping.
12 Replace the A-frame stabilizer pins and R-clips.
13 Rotate the A-frame down. Remove the shootbolts, at position used to hold
mudguards on the vehicle, press A-frame rotate PARK button on the interface
panel until PARKED light comes on.
14 Remove the two A-frame hinge-locking pins from each side.
15 Fold the A-frame legs. Press A-frame fold PARK button on interface panel until
parked light comes on.
16 Insert the two A-frame hinge-locking pins and 'R' clips on each side.