Figure 11. 102 Lower Top Module Onto Aid
CRUSH HAZARD. KEEP HANDS CLEAR OF THE TWO MODULES AS THE UPPER
MODULE IS LOWERED INTO PLACE. FAILURE TO HEED THIS INSTRUCTION COULD
LEAD TO SEVERE INJURY TO PERSONNEL.
When a ramp module is placed on top of another module the jaw and dowel end must face
the front of the flatrack.
Place the second bridge module on to the first using the transportation brackets as a
guide, positioning the module as close to the buffer as possible.
Fit five tie-down straps to each side of the stacked modules, and two diagonal straps
at the front end of the flatrack and four diagonal straps at the open end of the