PALLET CONTROLS AND INDICATORS (Contd)
TOOLBOX LATCHES AND HOLD-DOWN BRACKETS, BII INSTALLED
ANCHORAGE STOWAGE BOX LATCHES -- The latch at each end of
anchorage stowage box that is opened by pulling lever up and swinging latch
ANCHORAGE STOWAGE BOX RETAINING PINS -- Each anchorage
stowage box has two retaining pins for securing box to either the pallet or
bridge. Retaining pins are removed by turning pin until tang clears hook, and
then pulling pin from hole. The anchorage stowage box is a Basic Issue
Item (BII), and the following BIIs are stowed in it:
Anchoring pins -- 16 anchoring pins are stowed in bottom of each
anchorage stowage box; no hold-downs are required.
Anchoring pin remover -- Each anchorage stowage box contains one
anchoring pin remover. No hold-down is required.
Sledge hammer -- Each anchorage stowage box contains one sledge
hammer. No hold-down is required.
Drawing apparatus -- Each anchorage stowage box contains one drawing
apparatus. No hold-down is required.
Nail head -- Each anchorage stowage box contains one nail head. No hold-
down is required.