PALLET CONTROLS AND INDICATORS (Contd)
BATTERY BOX COVER -- There is a lid covering the pallet battery box
that is removed by removing a thumbscrew. To access the pallet batteries and
cables, the bridge must be off the pallet. To visually inspect the plastic
terminal lug covers, the battery box cover can be removed with bridge on
SUPPORTING WHEELS STEERING LEVERS -- Two steering levers are
located on front of pallet frame at each side of A-frame support. To steer pallet
while maneuvering, pull levers in the desired direction.
STEERING LEVER RETAINING PINS -- A retaining pin is located on
both the right and left steering levers. The retaining pins lock front support
wheels in the straight-ahead position. To remove a pin, turn pin until tang on
pin clears hook on pallet frame and pull retaining pin from hole.
SUPPORTING WHEELS HYDRAULIC PUMP HANDLE -- This
removable handle is used as an extension lever to manually operate the
hydraulic pump. The pump handle is stowed on A-frame. To remove, release
strap and lift handle off mounting stud. To operate pump, slide handle on
pump lever and move handle back and forth.