PALLET CONTROLS AND INDICATORS (Contd)
TANKER BAR -- A tanker bar is located on the pallet A-frame. To remove,
release strap and lift tanker bar out of socket. The tanker bar has 30 inch
marks used for measurement of REB distance from gap prior to launch.
PALLET LIFTING BRACKETS -- There are two wedge-shaped aluminum
brackets placed between the pallet launch boom and the coupling end of
bridge half when lifting pallet with a sling. To remove from stowed position,
loosen two thumbscrews and remove brackets from A-frame storage bracket.
SUPPORTING WHEELS CONTROL VALVE LEVER -- This lever is
mounted on the control valve and is used for operation of pallet supporting
wheels. To lower pallet, move the control valve lever to B position and operate
hydraulic pump. To lift pallet, move control valve lever to A position and
operate hydraulic pump.
SUPPORTING WHEELS SELECTOR VALVE LEVER -- This lever is
used to move selector valve to its three operating positions. Position 1
operates all axles, position 2 operates fixed axles only, and position 3 operates
steering axles only.