TM 5-5420-280-10
OPERATOR INSTRUCTIONS
RAPIDLY EMPLACED BRIDGE (REB)
LOADING PALLET FROM GROUND
NOTE
During all transporter operations, the CBT operator
will drive and be responsible for the operation of the
LHS by means of the cab and remote control boxes. The
assistant will act as a ground guide, be responsible for
directing the operator by using hand signals, and assist
the operator as needed.
Perform step 1, below, if pallet support wheel steering
levers are not locked in the straight-ahead position.
1. Move steering levers (1) right or left until retaining pins (2) can be inserted
through holes in steering levers (1) and pallet frame (3). Then install retaining
pins (2).
2
1
3
1
2