LOADING PALLET FROM GROUND (Contd)
All non-essential personnel must stand a minimum of
15 ft (4.6 m) away from truck and bridge during loading
operations. Failure to comply may result in injury or
death to personnel.
Operator will perform steps 7 through 21 using LHS
Ensure LHS RCU emergency stop switch is in the ON
position if RCU is connected to LHS receptacle; cab
LHS controls will not function otherwise.
7. Turn LHS MODE SELECT switch (5) to No. 1 (AUTO SEQUENCE) position.
High idle switch must be in the OFF position prior to
engaging PTO. Failure to comply may result in damage
to the vehicle transmission or the LHS.
8. With HIGH IDLE switch (6) in OFF position, turn PTO ENGAGE switch (8) to
ON position. The PTO ENGAGE indicator (7) will light.
9. Turn HIGH IDLE switch (6) to ON position.
EARLY MODEL LHS
LATE MODEL LHS