LOADING PALLET FROM GROUND (Contd)
When the NO TRANSIT WHEN LIT indicator is
illuminated, the CBT may be maneuvered in the
immediate vicinity of the loading/unloading site, but
should not be driven on the open road. Failure to
comply may result in damage to equipment and possible
injury or death to personnel.
CBT will roll backward when loading pallet from
ground. All personnel must stand clear. Failure to
comply may result in serious injury.
When loading the pallet, line up the pallet runners with
the LHS rear rollers. It may become necessary to steer
the transporter straight under the pallet as it is lifted
from the ground.
15. Push PARKING BRAKE control (6) in, and take foot off service brake (8).
16. Hold joystick (2) in LOAD position until pallet girders (10) contact LHS rear
rollers (11) and pallet (9) clears ground. Release joystick (2), and pull
PARKING BRAKE control (6) out.
17. Hold joystick (2) in LOAD position until pallet hook arm cylinders are
approximately 6 in. (15.2 cm) exposed, then release joystick (2).