TM 5-5420-280-10
0016 00
LAUNCH OF BRIDGE (Contd)
7. Remove key from passenger side pallet toolbox, and open RCU stowage box
lid (7). Refer to WP 0007 00.
CAUTION
If bridge halves become jammed due to misalignment
during launch functions, it may become necessary to
align bridge halves using pry bar before completing
launch function. Ensure jammed bridge halves are free
before performing launch function, or damage to
equipment may result.
NOTE
Step 8 through 60 are presented in the working step
sequence as programmed on the RCU display screen for
each function.
To start the launch sequence, release RCU EMERGENCY
STOP button, read the display screen, and perform the
stated launch function according to L XMAH code until
the stated function is completed.
If RCU will not power up, check main power switch and
emergency stop buttons; main power switch and all
emergency stop buttons must be in the ON position for
the system to operate.
Explanation of RCU Display Screen Text
LXMAH
Launch
(Hold) Start action by
depressing ACTION button;
Step No.
hold as long as required.
(Manually) Task is carried out
(Automatic) Start action by depressing
by hand.
ACTION button one time.
7
0016 00-5