RAPIDLY EMPLACED BRIDGE (REB)
1. Bridge Setup Prior to Crossing.
At no time should any personnel or vehicle of any kind
enter the emplaced bridge until the NCOIC has
approved the bridge safe for crossing. Failure to comply
may result in damage to equipment or possible injury
or death to personnel.
Check footing under ramp ends (3) of bridge at near shore to ensure it is
not loose or breaking away.
Visually check condition of bridge structure prior to entering bridge on
foot. Check crossforce coupling bumpers (1) for proper alignment, and
check both upper coupling lock remote control levers (4) and lower
Check footing under ramp ends (2) of bridge at far shore to ensure it is not
loose or breaking away.