BRIDGE RETRIEVAL (Contd)
Failure to remove launch boom retaining pins prior to
lowering launch boom, or stowing retaining pins in
mounting holes of launch boom lock brackets will result
in damage to equipment.
Operator and assistant will remove launch boom lock
retaining pins simultaneously to decrease retrieval
Loosen turnbuckle nut (11) as necessary, and remove retaining pin (8)
from launch boom lock (9) at both sides of pallet launch boom (10).
High idle switch must be in the OFF position prior to
engaging PTO. Failure to comply may result in damage
to the vehicle transmission.
If using LPU to retrieve bridge, perform step 11. If
using CBT back-up power, perform step 12.
With HIGH IDLE switch (14) in OFF position, move PTO ENGAGE
switch (12) to ON position. PTO ENGAGE indicator (13) will light.
CBT CAB CONSOLE