TRANSLOADING PALLET TO PALLETIZED LOAD SYSTEM
TRAILER (PLST) (Contd)
8. Disconnect pallet hold-down bars and place in stowed position. Refer to
Air pressure in trailer air system must be sufficient to
retract trailer locks, or damage to trailer locks may
occur while attempting to load pallet on trailer. If air
pressure is not sufficient, use truck to charge trailer air
system using trailer air-charging hose. If air system
cannot retract trailer locks, use manual trailer lock
retract procedure. Refer to TM 9-2330-385-14.
Ensure both trailer locks are fully retracted, or damage
to equipment may result.
9. Push in on knob (1) and retract left and right trailer locks (2). Ensure lock
indicator pin (3) is fully retracted.
10. Ensure pallet hydraulic hoses (4) and (5) are connected to pallet couplings (7)