TRANSLOADING PALLET TO PALLETIZED LOAD SYSTEM
TRAILER (PLST) (Contd)
CBT will roll forward when lowering pallet down on
trailer. All personnel must stand clear. Failure to
comply may result in serious injury.
21. Release parking brake by pushing parking brake control (1) in.
22. Place wheel chock behind first front wheel on driver's side of CBT.
Ensure steering axles are fully raised and not in contact
with trailer. If contact is noted, raise steering axles or
damage to equipment may result.
It may be necessary to move CBT forward slightly and
repeat step 23 one or more times in order to clear hook
arm from hook bar.
23. Hold HOOK ARM switch (5) or MAIN FRAME switch (6) in UNLOAD position
to allow tip of LHS hook arm (9) to clear pallet hook bar (8). Stow RCU (4).
24. Remove wheel chocks and move transporter forward 5 ft (1.5 m), apply service
brake (3), move transmission selector lever (2) to N (neutral), and pull parking
brake control (1) out. Replace wheel chocks.