TRANSLOADING PALLET FROM PALLETIZED LOAD SYSTEM TRAILER (PLST)
Ensure transloading of pallet is stopped when the
transload rollers are lined up with the end of the PLST
center guide rails. Failure to stop and raise pallet fixed
axles to halfway up position may result in damage to
transload roller bushings.
20. Move and hold HOOK ARM switch (2) to LOAD until transload rollers line
up with end of trailer center guide rails.
21. Raise fixed axles (10) to halfway up position as follows:
a. Position selector valve (6) in POSITION 2 or pointing up, and move
control valve (7) to POSITION A or left of center.
b. Install pump handle on pump lever (8) and operate hydraulic pump (9)
until fixed axles (10) are in halfway up position.