RAPIDLY EMPLACED BRIDGE (REB)
MANUALLY LOADING PALLET FROM GROUND
The following manual mode operations using cab control
box are to be performed only when normal AUTO mode
electric circuit is malfunctioning.
During all transporter operations, Common Bridge
Transporter (CBT) operator will drive and be responsible
for operation of Load Handling System (LHS) via the cab
control box or remote control unit. The assistant will act as
a ground guide, be responsible for directing operator using
hand signals, and assist operator as needed.
Perform step 1 if pallet support wheel steering levers are
not locked in the straight-ahead position.
1. Move steering levers (1) right or left until retaining pins (2) can be inserted
through holes in steering levers (1) and pallet frame (3), then install retaining