• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
SECONDARY BOOM ROLLERS REPLACEMENT
SECONDARY BOOM CYLINDER REPLACEMENT

TM-5-5420-280-23-P Rapidly Emplaced Bridge (REB) NSN: 5420-01-481-3959 Manual
Page Navigation
  491    492    493    494    495  496  497    498    499    500    501  
TM 5-5420-280-23&P
0098 00
SECONDARY BOOM ROLLERS REPLACEMENT (Contd)
REMOVAL
1.
Remove two screws (1), lockwashers (2), and washers (3) from secondary boom
shaft (7) on secondary boom (8). Discard lockwashers (2).
2.
Remove two rollers (5) and four washers (6) from boom shafts (7).
3.
If damaged, remove four bushings (4) from two rollers (5).
INSTALLATION
NOTE
Apply a light coat of grease to bushings and shafts at installation.
1.
If removed, install four bushings (4) on two rollers (5).
2.
Install four washers (6) and two rollers (5) on shafts (7) of secondary boom (8).
3.
Install two washers (3), new lockwashers (2), and screws (1) on ends of shafts (7).
4.
Install bridge halves on bridge pallet. Refer to WP 0018 00.
1
3
2
5
4
4
6
7
8
7
6
5
4
3
4
2
1
END OF WORK PACKAGE
0098 00-2






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.