TM 55-1945-205-10-2
0013 00 1
0013 00
OPERATOR MAINTENANCE
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
COMBINATION BEACH/SEA END SECTION
OPERATION UNDER USUAL CONDITIONS
INITIAL SETUP:
Tools
Tool Kit, General Mechanics (Rail and Marine) (Item 7, WP 0121 00)
Life Preserver, Vest (Item 33, WP 0119 00)
Gloves, Mens and Womens (Leather Palm) (Item 25, WP 0119 00)
Goggles, Sun, Wind and Dust (safety) (Item 27, WP 0119 00)
Helmet, Safety (Item 29, WP 0119 00)
Crowbar (Item 16, WP 0119 00)
Hammer, Hand (10 lb Sledge) (Item 29, WP 0119 00)
Personnel Required
Seaman 88K
Equipment Condition
Module ISOPAK Disassembled. (WP 0008 00)
Operation Of Male And Female Connectors. (WP 0009 00)
D-Ring/Cloverleaf Fittings And Deck Cleat Fittings Installed. (WP 0010 00)
Module String Assembled. (WP 0011 00)
PREPARATION FOR USE - ASSEMBLY OF ROLL-ON/ROLL-OFF DISCHARGE
FACILITY COMBINATION BEACH/SEA END SECTION
:,1*
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during RRDF operations and maintenance. Failure to observe these precautions
could result in serious injury or death.
Place hands on top or on the outside of ropes/lines so that in an emergency the lines
can be released quickly to preclude being pulled into the equipment. Failure to follow
these precautions could result in injury or death to personnel.
127(
The P3 Adaptor is used when the end rakes are to be mounted in an inverted position to
provide an alternate configuration of the roll-on/roll-off discharge facility beach end section.
1.
Pull the strings together using ropes/lines, flush turn tubes and deck cleats so that the tapered surfaces of male and
female connectors mate together in general alignment.