TM 55-1945-205-10-2
0019 00 7/8 blank
0019 00
12. Install 1 in. nut (37) to hold Tee bolt in place.
13. Install Tee bolt (35) into the ISO corner fitting (34).
14. Turn Tee bolt (35) 1/4 turn, hold against bottom upper surface of corner fitting (34) and finger tighten nut (37).
15. Using Tee handle (38). tighten nut (37).
16. Repeat above procedure for remaining corners and dunnage mats.
END OF WORK PACKAGE