0023 00 1
ROLL-ON/ROLL-OFF DISCHARGE FACILITY
OPERATION UNDER USUAL CONDITIONS
Tool Kit, General Mechanics (Rail and Marine) (Item 7, WP 0121 00)
Life Preserver, Vest (Item 33, WP 0119 00)
Gloves, Mens and Womens (Leather Palm) (Item 25, WP 0119 00)
Goggles, Sun, Wind and Dust (safety) (Item 27, WP 0119 00)
Helmet, Safety (Item 29, WP 0119 00)
PREPARATION FOR USE - INSTALLATION OF LIGHT TOWER UNIT
REMOVE FORWARD AND AFT LIGHT TOWER UNITS FROM CONTAINER
All personnel must wear personal flotation device, hard hat, safety shoes and gloves
during RRDF operations and maintenance. Failure to observe these precautions
could result in serious injury or death.
The following procedure is typical for the forward and aft light tower units installed in the
ISO container, except the light tower must be installed on the aft light tower unit.
Release tiedowns and remove light tower trailer drawbar (1) and drawbar jack (2) from ISO container.
Using forklift pull light tower trailer and pallet from container.
Install trailer drawbar (1) and drawbar jack (2) on light tower trailer with bolt (3) and nut (4) and set up on
drawbar jack (2).