• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REMOVAL OF GENERATOR CONTAINER - TM-55-1945-205-10-2_272
REMOVE CONTAINER FROM PLATFORM

TM-55-1945-205-10-2 Water Purification Barges NSN (1930-01-234-2165) Volume 9-3 Electric Power System Manual
Page Navigation
  225    226    227    228    229  230  231    232    233    234    235  
TM 55-1945-205-10-2 0041 00 3 0041 00 INSTALL LOUVER COVERS 1. Install louver covers. a. Remove attaching bolts and washers from louver frame. b. Position louver cover over the generator container louver and align the open holes. c. Install bolts and washers through the open holes of the louver cover and the holes in the generator container louver frame. 2. Repeat steps to install second louver cover. REMOVE GENERATOR CONTAINER GROUND CABLE 1. Detach ground cable C-Clamp (8) from module ISO fitting (9). 2. Remove nut (10), lock washer (11) and flat washer (12) from generator shelter ground stud (13). 3. Remove ground cable (14) from generator shelter ground stud (13). 4. Install flat washer (12), lock washer (11) and nut (10) on ground stud (13). 5. Tighten nut (10). 6. Detach power cable (15) from personnel shelter power receptacle (16). 7. Close exterior hinged cover of the electrical shore tie and secure in the closed position. 8 9 14 13 10 11 12 16 15







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.