0316 00 3
Do not force punch through core plug more than 1/8 in. (3 mm). Failure to comply will
damage carburetor body.
14. Locate core plug (17) on under side of carburetor body (18) and proceed as follows:
Using a small diameter punch, punch through core plug (17).
Remove core plug (17) and discard.
CLEAN RHIB ENGINE CARBURETOR COMPONENTS
Do not immerse carburetor body in carbon removing compound or in a hot tank. Do
not use carbon removing compound on plastic or rubber components. Failure to
comply will damage components.
Spray metal parts with carbon removing compound.
Using a clean bristle brush, remove any residual gasket material, dirt and varnish.