0337 00 2
Do not over fill the battery. Too much fluid can cause excess pressure in the battery
and cause battery acid to over flow through the vents and release harmful fumes into
the air. Failure to comply could result in serious injury or death to personnel.
As water evaporates the electrolyte level drops which can cause damage to the
battery. Excessive amounts of electrolyte can cause an overflow which will damage
equipment. Ensure only distilled water is added when levels drop
below acceptable limits.
Add distilled water to each of the reservoirs in battery (2) to the bottom of the fill ring (3).
Using a clean, dry, lint-free cloth, remove any dirt or debris from each battery cap (1).
Install all battery caps (1) on battery (2).
Install RHIB battery negative lead terminal. (WP 0336 00)
END OF WORK PACKAGE