0052 00 5
Remove all plastic and tape installed to seal out water and solvents.
Start engine and run until normal operating temperature is reached.
Clean the generator control box.
The following steps should only be performed in a well ventilated area. Failure to do
so could result in serious injury or death to personnel.
Disconnect the battery cables at the light tower battery.
Open the top of the generator control box and vacuum interior.
The cleaner must have an evaporative carrier agent which leaves no
residue after application.
Spray all switch contacts with a quality commercial electrical contact cleaner.
Cycle the switches through all possible positions spraying at each position.
Leave control box open until completely dry.
Close the top of the generator control box.
Connect battery cables.
Rigid Hull Inflatable Boat And Motor Cleaning
Clean the hull with clean water and soap.